« Takaisin

FA 410 Kastepistelähetin

CS Instruments GmbH

HUOM! FA 410 on poistuva tuote, katso FA 510/515

FA 410 - Ideaalinen instrumentti kalvo- ja adsorbtiokuivaimien kastepisteen valvontaan. 

Käytetään tyypillisesti paineilmakuivaimen/raekuivaimen valvonnassa erittäin matalille kastepisteille, jopa -80℃ asti

Ominaisuudet:

  • Measuring range -80...20°Ctd
  • Extremely long-term stable
  • Analogue output 4...20 mA
  • Condensation insensitive
  • Quick response time
  • Pressure-tight up to 350 bar (special version)

Liitteet
DataSheet_FA410_S6.pdf
FA410.pdf
Instruction_manual_FA410_V2_01_2008_English.pdf

Tekniset tiedot

Measuring range: -80...20°Ctd resp.
Accuracy: ± 1°C at 20...-20°Ctd
± 2°C at -20...-50°Ctd
± 3°C at -50...-80°Ctd
Pressure range: -1...50 bar
special version up to 350 bar
Power Supply: 24 VDC (16...30 VDC)
Protection class: IP 65
EMC: according to DIN EN 61326
Operating temp.: -20...70°C
Connection: M12, 5-pole
PC connection: SDI interface
Analogue output: 4...20 mA = -80...20°Ctd resp.
4...20 mA = -20...50°Ctd
Burden for analogue output: < 500 Ohm
Screw-in thread: G 1/2"
Dimensions: Ø 30 mm, length approx. 130 mm
Via service software:
- choose units: - scaling		  % RH, °Ctd, g/m³, mg/m³,
ppm V/Vchange 4...20 mA
Special version: 4...20 mA, 2-wire technology

Optiot

Connection cables

  • 1 x Connection cable, length: 5 m  
  • 1 x Connection cable, length: 10 m  

Options for FA 410

  • 1 x FA special version (350 bar)  
  • 1 x FA special scaling & output  

Additional accessories

  • 1 x Standard measuring chamber up to 16 bar  
  • 1 x High-pressure measuring chamber up to 350 bar  
  • 1 x Measuring chamber for respiratory air bottles  
  • 1 x CS Service Software for FA / VA 400 sensors  
  • 1 x Mains unit in wall housing  
  • 1 x Mains unit on DIN rail  

Calibration

  • 1 x Precision calibration at -40°Ctd  
  • 1 x Precision calibration at 0°C and 10°Ctd  
  • 1 x Control and calibration set 11.3 % RH  
  • 1 x Control and calibration set 32.9 % RH  
  • 1 x Control and calibration set 75.3 % RH  
  • 1 x Precision calibration in the range -80...20°Ctd (points freely selectable)  
  • 1 x Recalibration and precision calibration  

Tuote: 6990410.0